The main wall panel is made of fine steel plate as a whole, strong and durable, the motor adopts Taiwan Taibang brand, the electrical appliance adopts the domestic famous brand Zhengtai Electric, and the paper feeding belt adopts Guangdong Jiangmen product, which is wear-resistant and anti-slip. The pressure box belt is made of flat belt produced by Tianjin Liyang Co., Ltd., which is acid and corrosion resistant. The gluing part is all processed by domestic famous brand stainless steel. The whole machine adopts electrostatic spraying technology, and all fixed tie rods are processed by linear optical shafts made in Wuxi. Specification 2000 type, power supply 380V, 50hz, power 1.15kw, current 7A, weight about 1.1 tons, appearance size 2.65*2*1.3 meters, maximum processing size 2000*2100mm, minimum processing size 200*260mm

Characteristics of use

The press-fit gluer is the latest development according to the needs of small and medium-sized orders of users, it is small in size, occupies a small area, is easy to operate, and no experience is required: it is very suitable for the production of small batches of products and the replacement of types; Wide range of application: ordinary cartons, special-shaped color box single-page molding bonding, home decoration automatic glue spraying device can also do hook kick carton and heaven and earth cover carton, save glue: the amount of glue is only equivalent to one-third of manual gluing, save labor, the maximum speed of the machine is 56 m/min efficiency is 3-4 times that of manual operation, the bonding is firm, neat and non-overflowing; Solve the problem that the carton factory is easy to open the glue in some seasons, this machine is also suitable for automatic indentation line that is not good to process, special shaped and paper with open windows due to the use of manual folding to improve work efficiency.

Installation

A When the machine arrives at the designated place, please pay attention to the following work.

1. Check whether the parts of the machine have been damaged during transportation,

2. In the process of transfer and handling, the machinery should be handled carefully and gently, and the machine should be avoided from severe impact and vibration, so as not to affect the accuracy and life of the machine.

Before the machine is installed, you should also refer to the machine and related dimensions to check the placement site and choose the location, size and location.

B. Installation of the machine

1. Put the machine in place according to the requirements of the installation plan, and then adjust the level of the machine to no more than ±1.5mm.

2. Clear all the sundries in the machine, fastening accessories, check whether all fasteners are loose and fixed.

3. Turn on the power supply and say that the host is reliably grounded. The terminal block is in the small surface electrical box of the F control box.

 

Boot test run sequence

A According to the requirements of Chapter 5 of this manual for safe use and precautions, check whether each part of the machine is in a safe state, and make corresponding adjustments (the size of the gap between the main components such as the paste wheel and the pressure wheel, and the frictionless paper baffle and feeding tape). After confirming that there is no problem with each department, the power is on.

B Boot sequence

1. Turn on the power supply, close the air switch in the electrical box, and open the power lock.

Check whether the emergency stop switch is reset, and press the running switch indicator light to turn on.

Mobilize the main machine control knob, and the machine starts running.

Press the press-fit speed control switch to mobilize the knob press-fit belt to operate.

Chapter 4 Operation and adjustment of the machine

1. First, adjust the position of B cardboard holder according to the length of the cardboard, adjust the height of the C paper blocking knife according to the thickness of the cardboard, then loosen the B tensioner wheel transfer lever to loosen the feeding tape, adjust the position of the feeding paper belt and then tighten the D tensioning belt tightening wheel transfer rod; Adjust the top paper wheel A according to the width and warpage of the cardboard; So that the paper can be fed smoothly.

2. Adjust the position of the H pressur, and adjust the pressure of the ship according to the thickness of the cardboard, and adjust the position of the E grinder.

3. Pressure of the pressure wheel: adjust the position of the F paste barrel and the pressure of the pressure wheel.

4. Feed the paper to adjust the position of N photoelectricity, so that the paper is convenient to fold but will not fall freely.

 

Safe to use and maintain

1. Precautions for safe operation

(1) When you have to enter the machine for inspection and maintenance, you must cut off the power supply, lock the emergency stop switch, and the machine must not enter when it is running.

(2) Before the machine is operated, all the personnel present must be notified to avoid accidents.

(3) Non-professional electrical technicians shall not inspect and maintain the part of the machine, and shall not change it without authorization.

2. Inspection and maintenance

(1) In order to increase the service life of the machine and make it work efficiently, the machine must be regularly maintained and checked every day for abnormal sound, abnormal vibration and peculiar smell in operation. Whether the bearings and motors are running abnormally, whether the belt in each section is misaligned and tight, check the amount of glue applied to the bucket, and how much glue is there.

(2) Check the lubrication of the roller bearings of each wheel of the machine every month: lubrication of screw rod and chain; The tension of the chain. lubrication and maintenance of reducer; Fastening of screw fasteners.

3. Common fault solutions

When the belt deviates, it can be adjusted with belt tension bolts according to the belt deviation until the belt runs normally.

The cardboard is slanted, scrub the surface of the paper conveyor clean, and adjust the position of the wall plate, paper blocking knife and top paper wheel.

After pressing, open the glue, reduce the running speed of the press, and adjust the amount of glue.

Press-fit running slope, adjust the paper feeding method to reduce the press-fitting machine and rotation speed, and increase the thickness of the press-fit cardboard.

Adjust the photoelectric position and remove the dust on the photoelectric head.

The running speed is unstable, check whether there is foreign matter in each transmission part, and whether the paste wheel is adjusted too tightly.

 

name	brand	quantity	name	brand	quantity
The main motor is 0.75kw	Zhejiang Libang	1	Press-fit motor 0.4kw	Zhejiang Defu	1
Paper feeding belt	Guangdong Chengze	10	Conveyor belts	Tianjin Kaixing	3
Frequency converters	Zhejiang Defu	2	Main switch	Shanghai Zhengtai	1
Relays	Shanghai Zhengtai	4	Photoelectric switches	Zhejiang Hugong	2